HIGHLIGHTS

The rough adjustment of the cutting height is effected by adjusting the roller. The finer adjustment is effected by means of the upper handle bar. The Uni-Mower are standard equipped with a mechanical sliding of 0.45 m (on request also hydraulical). This sliding possibility ensures that even areas which are not easily accessible can be mowed, like under trees or bushes, near fences and path edges.

Duecker Uni Mower & Uni-Side Mower

The compact construction of the universal usable mower-, mulcher- and crusher machines UMT makes them specially suitable for small tractors from 13 kW (18 HP) upwards. They are available in working widths of 1.0, 1.3, 1.5 and 1.8 meters. The versatile adjustment possibilities of the attachment point of the three-point hydraulic, enables the mounting of the unit onto every three-point linkage. The Uni Mowers with working widths from 1.9 - 4.0 metres are versatile usable mower, mulcher and crusher machines. They are specially for tractors from 44kW (60 HP) upwards. The compact and robust frame-construction, the big dimension of the gear box, v-belt drive, bearings and flail-shaft makes the mower insensitive to foreign matters like stones, pieces of iron or wood and other matters. All units are available as front or rear unit and in combined front and rear unit. The side sliding is possible in front and rear mounting.

The Uni-Sidemower is infinitely variable in its working adjustment, so that it is usable on the most difficult slopes and embankments. Due to the special construction of the unit, the mower-head at the front of the pulling vehicle can be swung, so that there is no visual obstruction for the drive of the vehicle. The Uni-Sidemower cleanly cuts all types of grass, from sea grass to reed grass. Even the care of leisure areas like sports grounds, camping sites, air fields etc. is easily done. Thorny bushes, shrubs with a diameter of up to 3 cm and all other wild growing shrubs are no problem for the Uni-Sidemower.

SPECIFICATION

Uni Mower UMT 10/13/15/18

The compact construction of the universal usable mower, mulcher and crusher machines UMT makes them specially suitable for small tractors from 13kW (18 HP) upwards. They are available in working widths of 1.0, 1.3, 1.5 and 1.8 metres. The versatile adjustment possibilities of the attachment point of the three point hydraulic, enables the mounting of the unit onto every three point linkage.

The following three types are offered:
  • Front-unit
  • Rear-unit
  • Combined front and rear unit
The robust and simple construction makes the mowers insensitive to foreign matters like stones, pieces of iron or wood and other matters. All sorts of grass can be mowed. Even reed gress or thorny brushwood are no problem. The roller which covers the full mowing width ensures a good mowing result even on uneven ground.

The rough adjustment of the cutting height is effected by adjusting the roller. The finer adjustment is effected by means of the upper handle bar. The Uni-Mower are standard equipped with a mechanical sliding of 0.45m (on request also hydraulical.) This sliding possibility ensures that even areas which are not easily accessible can be mowed, like under trees or bushes, near fences and path edges.

These advantages guarantees a good and safe use on camping sites, fruit plantation, sport fields etc.

Uni Mower UMK 16/18/21

The robust mower, mulcher and crusher machines of the serie UMK are ideal for working on tractors with 23 to 44 kW (30 to 60 HP.) The working width are available from 1.60, 1.80 and 2.10 metres. The versatile adjustment possibilities of the attachment point of the three-point hydraulic, enables the mounting of the unit onto every three-point linkage.

The following three types of the UMT are offered:
  • Rear unit
  • Front unit
  • Combined rear and front unit
The big dimensioning of the gear unit, v-belt drive, bearings and flail shaft makes the mowers insensitive to foreign matters like stones, pieces of iron, wood and other matters. 

The rough adjustment of the cutting height is effected by adjusting the roller. The finer adjustment is effected by means of the upper handle bar.

The mounting-truss is standard mounted rigid. On request the units are available with a mechanical side sliding or a hydraulic side sliding. The mower can be shifted for 55cm. This sliding is useful at mowing on areas which are not easily accessible can be mowed like under trees, near walls and fences.

The operating range of the UNI-Mower UMK is versatile because it can cut all sorts of grass from gass over seaweed to reed grass. 

Uni Mower 19/23/27/30/40

The Uni Mowers with working widths from 1.9 - 4.0 metres are versatile usable mower, mulcher and crusher machines. They are specially for tractors from 44kW (60 HP) upwards. The compact and robust frame-construction, the big dimension of the gear box, v-belt drive, bearings and flail-shaft makes the mower insensitive to foreign matters like stones, pieces of iron or wood and other matters. All units are available as front or rear unit and in combined front and rear unit. The side sliding is possible in front and rear mounting.

Ground Adjustment
The roller, which covers the full mowing width, ensures a good ground adjustment even on uneven ground. The insert wheels are possible for working on uneven fields. The mounting truss is specifically designed for bigger tractors. The attached joints and the three-point pedestal, which is spring suspended to the rear, guarantee a big running smoothness in the unit, also in difficult areas. The wheels can be shifted on a guiding tube. The cutting height can also be changed.

Front-mounting, resp. front and rear mounting
All Uni Mowers UM can be mounted into the front three-point hydraulic cat.2 or in the vehicle-front-DIN-plate size 3. At combined units two three-point linkages are mounted, so a changing from front to rear mounting is not necessary. On request springs, which release the support weight of the mower can be installed. Depending to the adjustment the support-weight can be reduced up to 50%.

Adjustment of cutting height
The rough adjustment of the cutting height is effected by adjusting the roller. The finer adjustment is effected by means of the upper handle bar.

Side-sliding
The mounting-truss is standard mounted rigid. The sliding is useful for working in areas which are not easily accessible can be mowed, like under trees or bushes, near fences and path edges. At the UM 19 & 23 the three-point pedestal must be mounted 45cm to the side.

Counter-blade
For the addition of crushing the grass a counter blade can be fitted in the front area of the mower.

Flail-shaft, Flail
The heavy flails (2kg) made from spring steel are loosing hung into the flail-shaft and secured by means of a screw. During mowing, the centrifugal force brings the flails into the correct position. Should larger items obstruct during use, the flail moves to the rear. The electronic-dynamic balancing of the flail-shaft, the special suspension and the special construction of the flails made from spring steel, result in a favourable and power-saving rotational speed of the flail-shaft. Lower rotation speed also results in lower wear and helps to reduce the fuel consumption of the tractor. All rear-mountin units are delivered with a PTO-shaft with 540 rpm. A PTO-shaft with 1000rpm is available on request.

Collecting Bag
The Uni Mowers UM 19-23-27 can also be equipped with an additional collecting bag for the collection of the mowed material. The mounting to front models is not possible. The hydraulic cylinder enables the basket to be tipped. The mowed material is either collected at one point or emptied into swaths. Recommended for use on camping sites, leisure fields and paddocks. Old grass is mowed and the material is collected. 

Areas of use
The areas of use are varied from the use of agricultural areas in fruit and vineyards, on the verges of roads, wood paths, on sports fields and air fields.

Large Area Mower GFM 740

Working width - 7.40m
Transport width - 3m
Output per area - 6-8 ha/h
Revolution of PTO shaft - 1.000 RPM
Power Requirements - minimum 140 kW (190 HP)

The GFM 740 can be used in closed building and spitted building form. The GFM 740 in close building form will be operated in thrust way device.

The cutting height is central adjustable by the top link and on each mower without any difficulty.

The hydraulically control system for relief provide for a protection of the ground and an optimum work result.

At hitting on a barrier the mower on the side avoid to the rear, so the mower is protected against damages. 

For a space saving storage the GFM 740 can be parked in transport position. The middle mower can also be seperately used for smaller work.

Uni Mower PMK 18/ PMK 21

The Uni Mower is special developed for working in scarp. The mower-unit is intended for front mounting in the three point hydraulic of special vehicle, like Aebi or Reform.

The unit is pulling over the mounting-truss hung up, so that an optimum control of the mower-head can take place. An optimum control of the mower head is guaranteed. A side-swinging is also possible.

PMK 18
Working width - 1,80m
Transport width - 2,05m
Weight - 450kg
Three-point mounting - cat. I
PTO-shaft- 540 rpm
Number of flails - 40

PMK 21
Working width - 2,10
Transport width - 2,35
Weight - 490kg
Three-point mounting - Cat. I
PTO-shaft- 540 rpm
Number of flails - 46

Uni Sidemower SMT

The Uni Sidemower is infinitely variable in its working adjustment, so that it is usable on the most difficult slopes and embankments. Due to the special construction of the unit, the mower-head at the front of the pulling vehicle can be swung, so that there is no visual obstruction for the drive of the vehicle. The Uni Sidemower cleanly cuts all types from sea grass to reed grass. Even the care of leisure areas like sports grounds, camping sites, air fields etc. is easily done. Thorny bushes, shrubs with a diameter of up to 3cm and all other wild growing shrubs are no problem for the Uni Sidemower. 

The mowed material is strongly cut up and split up, so that it can rots away quite quickly. This makes a removal of the cut material unnecessary.

The compact construction and generous dimension of the flail-shaft and the flails makes the Uni Sidemower quite insensitive to foreign matters like stones, pieces of wood, metal parts and other foreign matters.

The special type of the suspension of the specialised spring steel flails result in a favourable and power saving rotation, therefore the wear is reduced to a minimum.

The good view of the working mower-unit and the simple operation which is effected from the hydraulic control system of the pulling unit, ensure a secure handling.

The built-in hydraulic resp. mechanic overload safety device avoids damages to the machine in the case of unintended starting at obstacles. 

The roller which covers the full mowing width ensures a good mowing result even on uneven ground.

The unit can be mounted three-point hydraulic or to the vehicle plate. The mounting and taking off of the Uni Sidemower is effected within a few minuted.

The Uni Sidemower SMT 15 is in series equipped with a lateral, hydraulic sliding of 0.65m. The hydraulic side sliding offers the advantage that obstacles will better driven round and the mower position can be changed.

By changing the working unit, the Uni Sidemower can also be used as brush or wild-growing herbs. The equipment can be supplied alternatively for right hand or left hand working. 

Uni Sidemower USM 10/13/15/18/21/26

The Uni Sidemower USM operates as rear unit in the norm three-point hydraulic, offset next to the pulling unit. The Uni Sidemower is infinitely variable in its working attachment, so that it is usable on the most difficult slopes, embankments and surfaces.

It is a universally usable mowing and mulching machine for the mowing of:
  • verges
  • embankments
  • fallow land
  • leisure areas
  • edges of fields
  • green fertiliser
  • green fallow
  • mucking of fields
  • cutting of heads of turnips etc.
The Uni-Sidemower cleanly cuts all types of grass, from sea grass to reed grass.

The cutted material is shredded and splitted so that it can rot away quickly. This makes a removal of the cutted area unnecessary. Even thick bushes can be cut quite small by means of the large flails and concurrently the material can easily be distributed.

There is a good view of the mower. The steering is effected from the hydraulic control system of the pulling unit. This combination ensures a good handling.

The built-in hydraulic resp. mechanic overload safety device avoids damages to the machine in the case of unintended starting at obstacles. The mounting and taking off of the Uni Sidemower is effected within a few minutes.

The roller which covers the full mowing width ensures a good mowing result on uneven ground.

The compact construction and the large dimension of the flail shaft and the flails makes the Uni Sidemower quite insensitive to foreign matters like stones, pieces of wood, metal parts and other foreign matters. The special type of the suspension of the specialised spring steel flails the result in favourable and power saving rotation, therefore the wear is reduced to a minimum.

In the special equipment the Uni Sidemower is equipped with a hydraulic side sliding. The position can be changed around 60cm, steered from the tractor hydraulic. Reflector posts, trees and other obstacles can be driven around easily.

Uni Sidemower SMK

The Uni Sidemower SMK operates as a front unit offset next to the vehcile in the three-point-hydraulic cat. II or in the vehicle-DIN-plate size 3 or 5. The Uni Sidemower SMK is a variable usable mowing and mulching machine for the mowing of:
  • verges
  • embankments
  • fallow land
  • leisure areas
  • edges of fields etc.
The Uni Sidemower is constructed for extensive work with thick brushwood and growth. It is infintely variable in its working adjustment so that it is usable on the most difficult slopes and embankments. Due to the special construction of the unit, the mower-head at the front of the pulling vehicle can be swung so that there is no visual obstruction for the drive of the vehicle. 

The Uni Sidemower SMK cleanly cuts all types of grass from sea grass to reed grass. Even the care of leisure areas like sports grounds, camping sites, air fields etc. is easily done. Thorny bushes, shrubs with a diameter if up to 3cm and all other wild growing shrubs are no problems for the Uni Sidemower. The mowed material is strongly cut up and split up so that it can rot away quite quickly. This makes the removal of the cut material unnecessary.

The compact construction and generous dimension of the flail shaft and the flails makes the Uni Sidemower quite insensitive to foreign matters like stones, pieces of wood, metal parts and other foreign matters.

The special type of the suspension of the specialised spring steel flails result in a favourable and power saving rotation, therefore the wear is reduced to a minimum.

The good view of the working mower-unit and the simple operation, which is effected from the hydraulic contro, system of the pulling unit, ensure a secure handling. The built-in overload safety device avoids damages to the machine in the case of unintended starting at obstacles. 

The roller which covers the full mowing width ensures a good mowing result even on uneven ground. The mounting and dismounting of the Uni Sidemower is effected within a few minutes.

The Uni Sidemower SMK can be equipped with following special equipment:
  • Hydraulically side sliding of 0.60m for driving round reflector posts, trees and other obstacles
  • Counter blade for addition crushing of grass
  • Wear pad lining mounted in the mower bonnet.
  • Hour meter
Follow Us: