HIGHLIGHTS

JAKE 350 Mounting Kit is an effective solution for mounting cranes with a 3-point fastening. JAKE 600, 800 and 800 tilt mounting kits are intended for mounting flange fastening cranes. JAKE 800 HD is designed for mounting truck cranes. JAKE 350 DG Mounting Kit suits for mounting all diggers with 3-point fastening to the tractor.

JAKE Mounting Kit

The JAKE Mounting kit comprises the sleeve units which are bolted on the upper side of the rear axle, the aid frame strengthening a tractor frame and the adaptor, intended for mounting different cranes and diggers. The set comes with all necessary parts and fasteners so that the installation of the JAKE mounting kit can be performed at the customer's place. 

SPECIFICATION

JAKE 350

A JAKE 350 Mounting Kit has been designed to mount 3-point fastening cranes with the gross lifting movement up to 45kNm on wheel tractors. The crane can be with or without hydraulic legs. The JAKE 350 also permits installation of a light harvester head on the crane. For heavier cranes choose a JAKE 350 HD.

Comparing with the crane mounted on a trailer the JAKE 350 provides the advantage to use the max. loading capacity of the trailer as the weight of the crane doesn't fall on the load but on the tractor increasing the pulling power of the tractor. The tractor equipped with the a JAKE Boom Support gains the pulling power even more by increasing the weight of the tractor nose.

The JAKE 350 Mounting Kit makes using the crane versatile as the crane mounted on the tractor can be combined with other devices and equipment connected to a 3-point linkage. Some limitations might come, however the reason is usually the crane and not the JAKE Mounting Kit.

JAKE 600

A JAKE 600 Mounting Kit has been designed to mount flange fastening cranes, the gross lifting movement up to 60kNm and maximum 7.5m. outreachm on wheel tractors. In case the crane of the similar size is used for a harvester work, the optimal choice is a JAKE 800. 

Comparing with the crane mounted on a trailer the JAKE 600 provides the advantage to use the max. loading capacity of the trailer as the weight of the crane doesn't fall on the load but on the tractor increasing the pulling power of the tractor. The tractor equipped with the a JAKE Boom Support gains the pulling power even more by increasing the weight of the tractor nose.

The JAKE 600 Mounting Kit makes using the crane versatile as the crane mounted on the tractor can be combined with other devices and equipment connected to a 3-point linkage.

JAKE 800

A JAKE 800 Mounting Kit has been designed to mount flange fastening cranes with the gross lifiting movement up to 80kNm on wheel tractors. Yet the JAKE 800 gives a great opportunity to mount a heavy harvester crane on the tractor. 

Comparing with the crane mounted on a trailer the JAKE 800 provides the advantage to use the max. loading capacity of the trailer as the weight of the crane doesn't fall on the load but on the tractor increasing the pulling power of the tractor. The tractor equipped with the a JAKE Boom Support gains the pulling power even more by increasing the weight of the tractor nose.

The JAKE 800 Mounting Kit makes using the crane versatile as the crane mounted on the tractor can be combined with other devices and equipment connected to a 3-point linkage.

JAKE 800 HD

A JAKE 800 HD Mounting Kit has been designed for mounting truck cranes of any size on wheel tractors. The size of the crane can only be limited by the weight of the tractor. The JAKE 800 HD is tailored for a fastening system of the truck crane. On a customer's request and optionally we can offer the JAKE Boom Support and JAKE Heavy Duty Support Legs.

JAKE 800 Tilt

A JAKE 800 Tilt has been designed for mounting heavy harvester cranes on wheel tractors. Moreover the JAKE 800 Tilt is very valuable with forwarder cranes. The JAKE 800 Tilt is strong enough for the cranes with a lifiting movement up to 80kNm.

By hydraulic cylinders the JAKE 800 Tilt allows to tilt the crane 5 degrees forward and 20 degrees backward. This provides a remarkable opportunity for harvesters to work more effectively without shifting the tractor and the forwarder cranes gain the advantage to reach 'the last metre.'

JAKE 350 DG

A JAKE 350 DG is a unique mounting kit is intended for mounting diggers with 3-point fastening on the wheel tractors. The JAKE 350 DG provides easy mounting of the digger on the tractor and quick releasing. 
Follow Us: