HIGHLIGHTS

JAKE offer numerous models of the JAKE Armour Plate for Valtra depending on a tractor model and its equipment. 

JAKE also design and manufacture the JAKE Armour Plate for other tractor brands and models. 

JAKE Armour Plates

For completing the protection we can offer a JAKE Engine Armour. The JAKE Armours improve the runnability and maneouverability of the tractor in the forest, turn the tractor bottom into a flat, smooth surface. For little service works such as changing oil filters, there are some shutters in the armour plate. All the JAKE Armour Plates are always fastened to the JAKE Aid Frame of the JAKE Mounting Kit. So if the tractor is not equipped with the JAKE Mounting kit, the JAKE Armour Plate must be ordered together with the Aid Frame. 

SPECIFICATION

Armour Valtra N3 Versu & Direct

Armour Valtra N3 HiTech

Armour Valtra N2 Versu & Direct

JAKE Armour Plate JPPT2 - Valtra N2 Versu & Direct with a plastic or steel fuel tank
JAKE Armour Plate for a Valtra N2-series tractor protecteds the basis of the cabin, the battery box and the fuel tank. As well a possible compressed air set is fully protected. JAKE Armour Plate does not reach under the engine, but a JAKE Engine Armour must be ordered seperately if needed. JAKE Armour Plate is fastened to a JAKE Aid Frame. 

JAKE Engine Armour JMP - Valtra N2 Versu & Direct
JAKE Engine Armour (JMP) for a Valtra N2-series tractor protects the basis of the engine, the oil sump and the front axle cardan. JAKE Engine Armour is fastened, depending on tractor's equipments, to the tractor frame or to the JAKE Aid Frame. 

JAKE Rear Armour JTP - Valtra N2 Versu & Direct
JAKE Rear Armour (JTP) is mounted on 3-point linkage's arms and protects the basis of the crane preventing branches from going under the cabin. While reversing the armour makes branches go under the tractor. Mounting and releasing of the armour is easy and fast because it's lifting on place by a linkage and locked to the fastening point of the upper linkage arm. 

JAKE Tank Cover for a plastic tank JTANKCOV - Valtra N2 Versu & Direct
JAKE Tank Cover protects the side of the original plastic fuel tank of Valtra N2-series. It is necessary especially with 38" rear tyres with non-skid chains. The same tank cover version fits with or without the JAKE Aid Frame. The JAKE Tank Cover is not needed if you have the JAKE Armour Plate.

Armour Valtra N1 HT & Advance

JAKE Armour Plate JPPT2 - Valtra N1 HiTech & Advance when plastic fuel tank
The JAKE Armour Plate (JPPT2) is designed for Valtra N1-series HiTech and Advance when the tractor is equipped with an original plastic fuel tank. The Armour Plate protects the tank, a possible compressed air set and the base of the cabin. The JAKE Armour Plate is mounted to an Aid Frame of the JAKE Mounting Kit, so if you don't have the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate.

JAKE Armour Plate JPPT1 - Valtra N1 HiTech & Advance when steely fuel tank
The JAKE Arnour Plate (JPPT1) is designed for Valtra N1-series HiTech and Advance when the tractor is equipped with an original steely fuel tank. The Armour Plate protects the space between the tractor frame and the tank, a possible compressed air set and the base of the cabin. The JAKE Armour Plate is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting kit, you have to order the Aid Frame with the Armour Plate.

JAKE Rear Armour JTP - Valtra N1 HiTech & Advance
A JAKE Rear Armour (JTP) is mounted on 3-point linkage's arms and protects the basis of the crane preventing branches from going under the cabin. While reversing the armour makes the branches go under the tractor. Mounting and releasing of the armour is easy and fast because it's lifted on place by a linkage and locked to the fastening point of the upper linkage arm. 

JAKE Tank Cover for plastic tank - Valtra N1 Hi-Tech & Advance
A JAKE Tank Cover protects the side of the original plastic fuel tank of the Valtra N1-series. It is necessary especially with 38" rear tyres with non-skid chains.  

Armour Valtra T3 Versu & Direct

JAKE Armour Plate JPPT2 - Valtra T3 Versu & Direct
The JAKE Armour Plate for Valtra T3-series Versu/Direct Tractors. The Armour Plate protects the basis of the cabin, the battery box, the fuel tank and possibly existing air tanks. The JAKE Armour Plate is mounted to the Aid Frame of the JAKE Mounting Kit so if the tractor is not equipped with the JAKE Mounting Kit the Jake Armour Plate JPPT2 must be ordered together with the Aid Frame. In case of need to protect the basic of the engine and the front cardan shaft, the JAKE Armour Plate can be completed with a JAKE Engine Armour (JMP). N.B The JAKE Armour Plate JPPT2 is only available for tractors with a 275 litre fuel tank.

Armour Valtra T3 HiTech

JAKE Armour Plate JPPT2 - Valtra T3-series HiTech T153h, T173h, T193h
The JAKE Armour Plate for Valtra T3-series HiTech tractors. There are two versions of the Armour Plate meant for tractors with or without an additional fuel tank. The Armour Plate protects the basis of the cabin, the battery box, possibly existing air tanks and the fuel tank. The JAKE Armour Plate is mounted to the Aid Frame of the JAKE Mounting Kit, so if the tractor is not equipped with the JAKE Mounting Kit the JAKE Armour Plate JPPT2 must be ordered together with the Aid Frame (JPPT2-AR). In case of need to protect the basis of the engine and the front cardan shaft, the JAKE Armour Plate can be completed with a JAKE Engine Armour (JMP).

Armour Valtra T2 Versu & Direct

JAKE Armour Plate JPPT2 - Valtra T2 Versu & Direct
JAKE Armour Plate for Valtra T3-series Versu/Direct tractors. The Armour Plate protects the basis of the cabin, the battery box and possibly existing air tanks. The JAKE Armour Plate is mounted to the Aid Frame of the JAKE Mounting Kit, so if the tractor is not equipped with the JAKE Mounting Kit the JAKE Armour Plate JPPT2 must be ordered together with the Aid Frame (JPPT2-AR). In case of need to protect the basis of the engine and the front cardan shaft, the JAKE Armour Plate can be completed with a JAKE Engine Armour. N.B The JAKE Armour Plate JPPT2 is only available for tractors with a 275 litre fuel tank.

Armour Valtra T0/T1

JAKE Armour Plate JPPT2 - Valtra T0/T1 Classic, HiTech, Advance - when plastic fuel tank and/or plastic battery box
The JAKE Armour Plate (JPPT2) for Valtra T0/T1-series Classic/HiTech/Advance when the tractor is equipped with a plastic fuel tank and/or with a plastic battery box. A compressed air tank may exist or not. The Armour Plate protects the basis of the cabin, the tank, the battery box and a possible air set. The JAKE Armour Plate is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate. 

JAKE Armour Plate JPPT2 - Valtra T0/T1 Classic, HiTech, Advance - when plastic battery box but not plastic fuel tank
The JAKE Armour Plate (JPPT2) for Valtra T0/T1-series Classic/HiTech/Advance when the tractor is equipped with a plastic battery box but not with a plastic fuel tank. A compressed air tank may exist or not. The Armour Plate protects the basis of the cabin, the battery box and a possible air set. The JAKE Armour Plate is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate. 

JAKE Armour Plate JPPT1 - Valtra T0/T1 Classic, HiTech, Advance - when not plastic fuel tank, not plastic battery box and not compressed air tank
The JAKE Armour Plate (JPPT1) for Valtra T0/T1-series Classic/HiTech/Advance when there ino plastic battery box, not a plastic fuel tank and not a compressed air tank. The Armour Plate protects the basis of the cabin and it is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate. 

JAKE Rear Armour JTP - Valtra T0/T1 Classic, Hitech, Advance
A JAKE Rear Armour (JTP) is mounted on 3-point linkage's arms and protects the basis of the crane preventing branches from going under the tractor. Mounting and releasing of the armour is easy and fast because it's lifted on place by the llinkage and locked to the fastening point of the upper linkage arm. 

JAKE Tank Cover - Valtra T1 Classic, HiTech, Advance
A JAKE Tank Cover protects the side of the original plastic fuel tank of the Valtra T1 series. It is necessary especially when using snow or ice chains on the rear wheels. The same tank cover version fits with or without the JAKE Aid Frame. The JAKE Tank Cover is not needed if you have the JAKE Armour Plate.

Valtra M1x0

JAKE Armour Plate JPPT2 - Valtra M-Series - when plastic fuel tank and/or plastic battery box
The JAKE Armour Plate (JPPT2) for Valtra M-series when the tractor is equipped with a plastic fuel tank and/or with a plastic battery box. A compressed air tank may exist or not. The Armour Plate protects the basis of the cabin, the tank, the battery box and a possible air set. The JAKE Armour Plate is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate. 

JAKE Armour Plate JPPT2 - Valtra M-Series - when plastic battery box but not plastic fuel tank
The JAKE Armour Plate (JPPT2) for Valtra M-Series when the tractor is equipped with a plastic battery box but not with a plastic fuel tank. A compressed air tank may exist or not. The Armour Plate protects the basis of the cabin, the battery box and a possible air set. The JAKE Armour Plate is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate. 

JAKE Armour Plate JPPT1 - Valtra M-Series - when not plastic fuel tank, not plastic battery box and not compressed air tank
The JAKE Armour Plate (JPPT1) for Valtra M-Series when there ino plastic battery box, not a plastic fuel tank and not a compressed air tank. The Armour Plate protects the basis of the cabin and it is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate. 

JAKE Rear Armour JTP - Valtra M-Series
A JAKE Rear Armour (JTP) is mounted on 3-point linkage's arms and protects the basis of the crane preventing branches from going under the tractor. Mounting and releasing of the armour is easy and fast because it's lifted on place by the llinkage and locked to the fastening point of the upper linkage arm. 

JAKE Tank Cover - Valtra M-Series
A JAKE Tank Cover protects the side of the original plastic fuel tank of the Valtra M-series. It is necessary especially when using snow or ice chains on the rear wheels. The same tank cover version fits with or without the JAKE Aid Frame. The JAKE Tank Cover is not needed if you have the JAKE Armour Plate.

Valtra X1x0, XM1x0

JAKE Armour Plate JPP - Valtra X1x0, XMI1x0
The JAKE Armour Plate for Valtra X/XM series consists of the right and the left armours. There are two models of the armour: for the tractors with the JAKE Mounting Kit and for the tractors without it. The JAKE Armour Plate for Valtra X/XM series doesn't demand the air frame of the JAKE Mounting Kit.

Valtra Mezzo, Mega

JAKE Armour Plate JPP - Valtra/Valmet 6000 and 8000 series - with no extra fuel tank and no compressed air tank
The JAKE Armour Plate for Valtra 6000/8000 series protects the basis of the cabin and it is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit you have to order the Aid Frame with the Armour Plate.

JAKE Armour Plate JPPT1 - Valtra/Valmet 6000 and 8000 series - with no extra fuel tank and/or compressed air tank
The JAKE Armour Plate for Valtra 6000/8000 series protects the basis of the cabin and it is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit you have to order the Aid Frame with the Armour Plate. The JAKE Armour Plate protectes also an extra fuel tank and an air tank.

Valtra A, 700, 800, 900

JAKE Armour Plate JPP - Valtra Ax5, Ax2, 700, 800, 900
The JAKE Armour Plate for Valtra A-/M100-series protects the basis of the cabin and it is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate.

Valtra A HiTech

JAKE Armour Plate JPPT2 - Valtra A83 HiTech, A93 HiTech
JAKE Armour Plate for Valtra A-3-series protects the basis of the cabin. Completed with a JAKE Engine Armour also the engine basis and the front axle cardan is protected. Both these armours are fastened to a JAKE Aid Frame.

MF 54xx

JAKE Armour Plate JPPT2 - MF 5425, 5435, 5445, 5455, 5460
The JAKE Armour Plate for MF 54xx-series protects the basis of the cabin and it is mounted to an Aid Frame of the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate.

MF 44xx

JAKE Armour Plate JPP - MF 4435, 4445, 4455
The JAKE Armour Plate for MF 44xx-series protects the basis of the cabin and it is mounted to the Aid Frame of the JAKE Mounting Kit, you have to order the Aid Frame with the Armour Plate.

McCormick

JAKE Armour Plate JPP - McCormick MC115
The JAKE Armour Plate for a McCormick MC115 protects the basis of the cabin and it is mounted to the Aid Frame of the JAKE Mounting Kit so if you don't have the JAKE Mounting Kit you have to order the Aid Frame with the Armour Plate.

JD 6530, 6534, 6630

JAKE Armour Plate JPPT2 - JAKE Engine Armour JMP - John Deere 6530, 6534, 6630
The JAKE Armour Plate and the JAKE Engine Armour protect the basis of the whole tractor. Also a plastic fuel tank and possible front axle suspension are protected. These two armours are fastened to a JAKE Aid Frame and can't be delivered separately. 
Follow Us: