Heizohack Electric Motor Woodchippers

The manually fed Heizohack wood chippers can break down all wood waste, such as slats, beams, logs, blocks or branches and trunks with a diameter up to a maximum of 300mm or 400mm. A steel conveyor belt and a pressure roller with welded tongs ensure a powerful and reliable feeding of the material. 

The Heizohack wood chippers are equipped with a low drag drum chip rotor.Thereby flawless operation is also possible with low drive performance and the fuel consumption is reduced. The drive can take place using a propeller shaft, via an internal combustion engine (HM 6-300 VM) or via an electro-motor (HM 4/6-300 EM, HM 5/6/8-400 EM).  The hydraulic feed units supply is undertaken via it´s the own on-board hydraulic system.

SPECIFICATION

HM4-300EM

Technical Data
Height of feed - 300mm
Width of feed - 370mm
Feed - In-feed table 900mm long
Sieve - Standard Mesh 35/40mm
Drum - 450mm with quick exchangeable blades
Flywheel mass -130kg, diameter 1120mm, 60mm thick

Controls - Automatically load dependent feed regulation
Two daily counters and one overall operating hours counter.
Belt feed infinitely adjustable.
Control cabinet with star delta switiching.

Auxiliary Engines - Electric Motor 45kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 625kg.

Auxiliary Engines - Electric Motor 55kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 680kg.

Auxiliary Engines - Electric Motor 75kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 810kg.

Ejection - Manually foldable and rotatable,
supported by pneumatic shock damper.
        
Drive RPM - Maximum 750 rev/min
Weight without electric motor - 2100kg

HM6-300EM

Technical Data
Height of feed - 300mm
Width of feed - 539mm
Feed - In-feed table 900mm long
Sieve - Standard Mesh 35/40mm
Drum - 450mm with quick exchangeable blades
Flywheel mass -130kg, diameter 1120mm, 60mm thick

Controls - Automatically load dependent feed regulation
Two daily counters and one overall operating hours counter.
Belt feed infinitely adjustable.
Control cabinet with star delta switiching.

Auxiliary Engines - Electric Motor 45kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 625kg.

Auxiliary Engines - Electric Motor 55kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 680kg.

Auxiliary Engines - Electric Motor 75kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 810kg.

Ejection - Manually foldable and rotatable,
supported by pneumatic shock damper.
        
Drive RPM - Maximum 750 rev/min
Weight without electric motor - 2320kg

HM5-400EM

Technical Data
Height of feed - 400mm
Width of feed - 451mm
Feed - In-feed table 900mm long
Sieve - Standard Mesh 35/40mm
Drum - 495mm with quick exchangeable blades
Flywheel mass -300kg, diameter 1370mm, 60/90mm thick

Controls - Automatically load dependent feed regulation
Two daily counters and one overall operating hours counter.
Belt feed infinitely adjustable.
Control cabinet with star delta switiching.

Auxiliary Engines - Electric Motor 45kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 625kg.

Auxiliary Engines - Electric Motor 55kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 680kg.

Auxiliary Engines - Electric Motor 75kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 810kg.

Ejection - Manually foldable and rotatable,
supported by pneumatic shock damper.
        
Drive RPM - Maximum 750 rev/min
Weight without electric motor - 2950kg

HM6-400EM

Technical Data
Height of feed - 400mm
Width of feed - 539mm
Feed - In-feed table 900mm long
Sieve - Standard Mesh 35/40mm
Drum - 495mm with quick exchangeable blades
Flywheel mass -300kg, diameter 1370mm, 60/90mm thick

Controls - Automatically load dependent feed regulation
Two daily counters and one overall operating hours counter.
Belt feed infinitely adjustable.
Control cabinet with star delta switiching.

Auxiliary Engines - Electric Motor 45kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 625kg.

Auxiliary Engines - Electric Motor 55kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 680kg.

Auxiliary Engines - Electric Motor 75kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 810kg.

Ejection - Manually foldable and rotatable,
supported by pneumatic shock damper.
        
Drive RPM - Maximum 750 rev/min
Weight without electric motor - 3170kg

HM8-400EM

Technical Data
Height of feed - 400mm
Width of feed - 708mm
Feed - In-feed table 900mm long
Sieve - Standard Mesh 35/40mm
Drum - 495mm with quick exchangeable blades
Flywheel mass -470kg, diameter 1370mm, 60/90mm thick

Controls - Automatically load dependent feed regulation
Two daily counters and one overall operating hours counter.
Belt feed infinitely adjustable.
Control cabinet with star delta switiching.

Auxiliary Engines - Electric Motor 45kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 625kg.

Auxiliary Engines - Electric Motor 55kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 680kg.

Auxiliary Engines - Electric Motor 75kW/1500rpm,
V Belt drive, control cabinet with star delta switiching.
Weight with frame 810kg.

Ejection - Manually foldable and rotatable,
supported by pneumatic shock damper.
        
Drive RPM - Maximum 750 rev/min
Weight without electric motor - 3550kg
Follow Us: