Gmeiner Spreaders

Spreaders of 0.8 m³ up to 17.5 m³ cover optimally the professional needs of municipalities, road and motorway maintenance and contractors.

SPECIFICATION

Small Spreader Series Husky

The Streuerbaureihe Husky spreader includes the Twin Concept Series in container sizes ranging from 0.8 m³ to 1.5 m³. scattered all machines from the home Gmeiner be produced exclusively in Germany and meet the highest quality requirements. The excellent workmanship and the use of proven components for years reflect the great technical know-how of the entire product range. The extremely flat design with a low sidewall height allows the driver when maneuvering and reversing an excellent visibility to the rear.

The driving characteristics of the vehicle-device combination are positively affected even in extreme situations due to the very low center of gravity. Various scattering materials such as salt, grit or granules in free-flowing condition to be applied precisely with this dosing system. The different spreader types of Twin Concept series are designed so beneficial that the payloads, the axle loads and total weights of the new Unimog series are optimally utilized. Available Twin Concept series is for Unimog in container sizes from 1.8 m³ to 4.4 m³ both in single-and in dual-chamber design. In the double chamber version accounts for about 1/3 of the tank volume to the salt chamber and about 2/3 of the split chamber.

All containers of this series are also available with advanced moist salt technology or dual-chamber / wet salt combination. During the prewetted special liquid tanks are used, the volumes of which are optional tailored to the specific container sizes, and thus ensure accurate FS 30 scattering to the end. For the stainless steel design optimal for winter equipment alloy is used, whereby the best possible corrosion protection is achieved. Upon request, our stainless steel spreaders are also available in lacquered finish.

Highlights

  • Particularly flat design - very good visibility for the driver
  • Very low centre of gravity - no sway when cornering
  • Very good weight distribution
  • Tipping the carrier vehicle in extreme situations by low centre of gravity
  • Extremely low vehicle construction - easy to load
  • Favourable axle load distribution
  • Safe driving even with a full shaker
  • Particularly short overhang of the scattering part to the rear - agility remains
  • Exact dosage and distribution of the binding. 

     

Medium Spreaders Series Yeti

The Yeti Streuerbaureihe includes spreaders of the Twin Concept Series in container sizes from 1.8 m³ to 4.4 m³. spreaders all from the home Gmeiner be produced exclusively in Germany and meet the highest quality requirements. The excellent workmanship and the use of proven components for years reflect the great technical know-how of the entire product range. The extremely flat design with a low sidewall height allows the driver when maneuvering and reversing an excellent visibility to the rear.

The driving characteristics of the vehicle-device combination are positively affected even in extreme situations due to the very low center of gravity. Various scattering materials such as salt, grit or granules in free-flowing condition to be applied precisely with this dosing system. The different spreader types of Twin Concept series are designed so beneficial that the payloads, the axle loads and total weights of the new Unimog series are optimally utilized. Available Twin Concept series is for Unimog in container sizes from 1.8 m³ to 4.4 m³ both in single-and in dual-chamber design. In the double chamber version accounts for about 1/3 of the tank volume to the salt chamber and about 2/3 of the split chamber.

All containers of this series are also available with advanced moist salt technology or dual-chamber / wet salt combination. During the prewetted special liquid tanks are used, the volumes of which are optional tailored to the specific container sizes, and thus ensure accurate FS 30 scattering to the end. For the stainless steel design optimal for winter equipment alloy is used, whereby the best possible corrosion protection is achieved. Upon request, our stainless steel spreaders are also available in lacquered finish.

Highlights
  • Particularly flat design - very good visibility for the driver
  • Very low centre of gravity - no sway when cornering
  • Very good weight distribution
  • Tipping the carrier vehicle in extreme situations by low centre of gravity
  • Extremely low vehicle construction - easy to load
  • Favourable axle load distribution
  • Safe driving even with a full shaker
  • Particularly short overhang of the scattering part to the rear - agility remains
  • Exact dosage and distribution of the binding. 

Large Spreaders Series Icebear V Series

The excellent workmanship and the use of years of proven components reflect the great technical know-how in this series. , the spreaders of Truck Concept series are available in container sizes from 4.0 m³ to 9.0 m³ both in dry as well as in wet salt versions. The innovative cluster system always guarantees optimum results both in the dry and in the wet salting. The new distribution table ensured thanks to the pressurized effluent of that scattering direction does not vary regardless of the dose and the rate of the spreading vehicle. The new moist salt distributor is designed such that the brine optimally mixed in each segment of the spreading disc with the solid and the diffusion means, irrespective of the asymmetry without affecting and is distributed by the turbulence caused by the vehicle on the road surface uniformly. Through this exact scattering material spreading litter material can be saved - that protects the environment and to the economic aspect in winter service to Good.

 
In the Truck Series Concept is a flexible system that can accommodate three different grit feeders with only one container construction. Depending on the requirements of the customer following systems are available: a proven auger system with steel coils and progressive slope, a rubber band for years proven system with rollers and a bucket chain conveyor belt, also with a shovel rollers. Thus can be covered in a modern winter road maintenance with the new series every conceivable application situations.
 
The production well, the scattering chamber with spreader plate and the protective covers with all fittings are made of stainless steel to ensure a comprehensive and permanent protection against corrosion. The litter box is painted in an ultramodern auto paint shop. This special painting combines excellent adhesion of the liquid Epoxydpolyamid primer with the final hardness of the powder coating based on polyester resin. The protective cover of the distributing plate is made of plastic and includes the spreading disc at splash guard. If desired, the entire litter box can be supplied in stainless steel.

The Concept Truck Series has undergone an extensive GS safety test, thus ensuring maximum safety for the user in daily winter service use. The scattering model accuracy has been demonstrated successfully in a test of accuracy scatter TLG Part B 3rd.

Large Spreaders Series Icebear W Series

The Icebear W Streuerbaureihe includes spreaders of the Twin Concept Series in container sizes from 4.0 m³ to 8.0 m³. scattered all machines from the home Gmeiner be produced exclusively in Germany and meet the highest quality requirements. The excellent workmanship and the use of years of proven components reflect the great technical know-how of the products on offer. The Streuerbaureihe Twin Concept with two parallel augers has decisive advantages: The handling characteristics of the vehicle-device combination due to the very low center of gravity in extreme situations positively influenced.

Various scattering materials such as salt, grit or granules in free-flowing condition to be applied precisely with this dosing system. The truck spreaders from the series Twin Concept are designed so beneficial that the payloads, the axle loads and total weights of the support vehicles are optimally utilized. Available series is the twin concept for container truck in two categories. The first version includes the container sizes 2.0 m³, 2.5 m³ and 3.0 m³ and fits for small to medium trucks (these spreaders have been presented under the category of "twin concept"). The second version with tank sizes from 4.0 m³ to 8.0 m³ is designed for all major truck series.

The container sizes are available in both single-as well as double chamber version. In the double chamber version accounts for about 1/3 of the tank volume to the salt chamber and about 2/3 of the split chamber. Naturally all container sizes in this range are optionally available with advanced moist salt technology and in stainless steel. During the prewetted special liquid tanks are used, the volumes of which are optimally adapted to the respective container sizes and thus ensure accurate FS 30 scattering to the end. For the stainless steel design optimal for winter equipment alloy is used, whereby the best possible corrosion protection is achieved. Upon request, our stainless steel spreaders are also available in a painted finish.

Highlights
  • Particularly flat design - very good visibility for the driver
  • Very low centre of gravity - no sway when cornering
  • Very good weight distribution
  • Tipping the carrier vehicle in extreme situations by low centre of gravity
  • Extremely low vehicle construction - easy to load
  • Favourable axle load distribution
  • Safe driving even with a full shaker
  • Particularly short overhang of the scattering part to the rear - agility remains
  • Exact dosage and distribution of the binding. 

Three-point Spreader TRACON

The spreaders of the proven series TRACON are by their low container construction bestenes for mounting on tractors with three point linkage. The vehicle unit combination is optimized to meet specific applications in the municipal sector. The dry material spreaders of TRACON series are available in both single-and in dual-chamber design. As like always your requirements and wishes also look - with a spreader of the series TRACON you opt for high reliability, superior service and an affordable price / performance ratio. The excellent workmanship and the use of proven components for years reflect the great technical know-how in this series. The TRACON series has decisive advantages in daily winter service use.

Robust Design
The transmission of the screw conveyor was moved further inward and thus is no longer on the container width. This means a much better protection of the drive unit. The hydraulic block and the distributor box are mounted in a sealed equipment room.

Very high proportion of stainless steel
Joining and fastening elements made of stainless steel spreader, plate and friction plate, stainless steel appliances stainless steel safety cover, folding roof mechancism made of stainless steel, optional stainless steel partition.

Very short cultivation
Good utilization of the front axle, extremely short growing back, very good overview of the platform, low centre of gravity, safe driving even with a full litter box.

Highest flexibility
Container sizes from 1.0 m³ to 1.8 m³, spread 1-8 m adjustable, routes dependent scattering material distribution, three-point linkage for all standard tractors (Cat 2), available with PTO and independent hydraulic system, dual chamber design for salt, sand and gravel optional , wet salt optional equipment, many additional options available. 

Highest quality standard
Self-supporting container structure (thickness 4-6 mm), continuous welds, built-protected control components, special paint for use in winter services, processing high-quality components, proven scattering material distribution, certified to ISO 9001:2008.

Trailer Spreaders Husky Tee

The spreaders of the proven Streuerbaureihe Husky are by their low container construction ideal for mounting on trailer chassis. The spreader-trailer combination Husky T is optimally tailored to meet specific applications in the municipal sector. You have the choice: dry or wet salt spreaders, single chamber or double chamber version. Whatever may also look your requirements and desires - with a spreader-trailer combination of Gmeiner you opt for high reliability, superior service and a favorable price-performance ratio. The excellent workmanship and the use of proven components for years reflect the great technical know-how this complete solution. The spreader-trailer combination has significant advantages in daily winter service use.

Advantages

Extremely shallow container construction
Optimals Overview and safety for the user particularly low container focus Very good riding the winter service combination Own hydraulic powered mechanically driven Wheel The carrier vehicle does not need a hydraulic supply Powerful electric drive for status emptying optional Easy emptying of the spreader in the state of operation without additional hydraulic supply modern wet salt technology with high quality Bronze pump, check valve and complete stainless steel piping.

Structure points to the ball of the trailer chassis
The dock leveler of the trailer is protected in winter service. In the summer, use the leveler is mounted instead of the spreaders.

Combined Spreaders Icebear C.

The combination spreaders Icebear C series are available in container sizes from 4.0 m³ to 6.0 m³. Thus, an exact adaptation to various carrier vehicles is possible. The combination of the scattering device Icebear C series allows the inclusion of different de-icing with just one device. Dry salt, or pure liquid salt Salz-/Sole-Gemisch scattering are possible with this series. Grit The supply of dry salt is a proven auger system. The clean liquid is spread on to the back of a nozzle system of the vehicle. The excellent workmanship and the use of proven components for years reflect the great technical know-how in this series. The combination spreaders Icebear C series have significant advantages in daily winter service.

Liquid Spreaders Husky L

The liquid spreaders of Husky L series are available in several universal sizes from 1,000 liters to 2,000 liters. For the specific structure of different carrier frame available to the Husky L mounted quickly and securely on a wide variety of carrier vehicles can. The figure above shows the Husky 2000 L with a volume of 2,000 liters. The liquid spreader is equipped with 8 nozzles that are distributed on a fixed rear bar. It is equipped with an automatic control system, which ensures a constant spray width. The rear-mounted spraying ramps are controlled by electronic control valves. These regulate the spray width up to 10.5 m. The spray nozzles operate with all specified fluids. The dosage fits securely to the width and the vehicle speed. Control across multiple nozzles ensures a constant spray and provides a controlled spray width.

Liquid Spreaders Yeti L

The liquid spreaders of the Yeti L series are available in tank capacities from 3,000 liters to 6,000 liters. The filling volume can be limited to the capacity actually needed. Thus, an exact adaptation to different carrier vehicles is possible. liquid The spreader is provided with nozzles, which are distributed on a fixed rear bar. It is equipped with an automatic control system, which ensures a constant spray width. The rear-mounted spraying ramps are controlled by electronic control valves. These regulate the spray width up to 10.5 m. The spray nozzles operate with all specified fluids. The dosage adapts to the width and the vehicle speed. Control across multiple nozzles ensures a constant spray and provides a controlled spray width.

Liquid Spreaders Icebear L

The liquid spreaders Icebear L series are available in container sizes from 8.0 cubic meters to 17.5 cubic meters. Thus, an exact adaptation to different carrier vehicles is possible. liquid The spreader is provided with nozzles, which are distributed on a fixed rear bar. It is equipped with an automatic control system, which ensures a constant spray width. The rear-mounted spraying ramps are controlled by electronic control valves. These regulate the spray width up to 10.5 m. The spray nozzles operate with all specified fluids. the dosage adapts to the width and the vehicle speed. Control across multiple nozzles ensures a constant spray and provides a controlled spray width.
Follow Us: